tllr540., tlly540., tllg540. www.vishay.com rev. 1.7, 29-apr-13 1 document number: 83030 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 low current led in ? 5 mm tinted diffused package product group and package data ? product group: led ?package: 5 mm ? product series: low current ? angle of half intensity: 25 features ? low power consumption ? high brightness ? cmos/mos compatible ? specified at i f = 2 ma ? luminous intensity categorized ? yellow and green color categorized ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? low power dc circuits ? 19223 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. tllr5400 red 0.63 1.2 - 2 612 - 625 2 - 1.9 2.4 2 gaasp on gap tllr5401 red 1 2 - 2 612 - 625 2 - 1.9 2.4 2 gaasp on gap tlly5400 yellow 0.63 1.2 - 2 581 - 594 2 - 2.4 2.9 2 gaasp on gap tlly5401 yellow 1 2 - 2 581 - 594 2 - 2.4 2.9 2 gaasp on gap tllg5400 green 0.63 1.2 - 2 562 - 575 2 - 1.9 2.4 2 gap on gap TLLG5400-AS12 green 0.63 1.2 - 2 562 - 575 2 - 1.9 2.4 2 gap on gap tllg5401 green 1 2 - 2 562 - 575 2 - 1.9 2.4 2 gap on gap absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? tllr540., tlly540., tllg540. parameter test condition symbol value unit reverse voltage v r 6v dc forward current t amb ? 90 c i f 7ma surge forward current t p ? 10 s i fsm 0.15 a power dissi pation t amb ? 90 c p v 20 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 55 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 500 k/w
tllr540., tlly540., tllg540. www.vishay.com rev. 1.7, 29-apr-13 2 document number: 83030 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmin. /i vmax. ? 0.5 note (1) in one packing unit i vmin. /i vmax. ? 0.5 note (1) in one packing unit i vmin. /i vmax. ? 0.5 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tllr540., red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 2 ma tllr5400 i v 0.63 1.2 - mcd tllr5401 i v 12-mcd dominant wavelength i f = 2 ma ? d 612 - 625 nm peak wavelength i f = 2 ma ? p - 635 - nm angle of half intensity i f = 2 ma ? - 25- deg forward voltage i f = 2 ma v f -1.92.4v reverse voltage i r = 10 a v r 620- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlly540., yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 2 ma tlly5400 i v 0.63 1.2 - mcd tlly5401 i v 12-mcd dominant wavelength i f = 2 ma ? d 581 - 594 nm peak wavelength i f = 2 ma ? p - 585 - nm angle of half intensity i f = 2 ma ? - 25- deg forward voltage i f = 2 ma v f -2.42.9v reverse voltage i r = 10 a v r 620- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tllg540., green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 2 ma tllg5400 i v 0.63 1.2 - mcd tllg5401 i v 12-mcd dominant wavelength i f = 2 ma ? d 562 - 575 nm peak wavelength i f = 2 ma ? p - 565 - nm angle of half intensity i f = 2 ma ? - 25- deg forward voltage i f = 2 ma v f -1.92.4v reverse voltage i r = 10 a v r 620- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf
tllr540., tlly540., tllg540. www.vishay.com rev. 1.7, 29-apr-13 3 document number: 83030 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative luminous in tensity vs. angular displacement fig. 3 - forward current vs. forward voltage fig. 4 - relative luminous in tensity vs. ambient temperature fig. 5 - relative luminous intens ity vs. forward current/duty cycle fig. 6 - relative luminous intensity vs. forward current 0 2 4 6 8 10 i f - forward current (ma) t - ambient temperature (c) 0 2040 6080100 95 10064 0.4 0.2 0 0.2 0.4 0.6 95 10060 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity 0.1 1 10 100 v f - forward voltage (v) 95 10050 i f - forward current (ma) red t p /t = 0.001 t p = 10 s 5 4 3 2 0 1 0 95 10051 20 40 60 80 100 i v rel - relative luminous intensity i f = 2 ma 0 0.4 0.8 1.2 1.6 2.0 t amb - ambient temperature (c) red 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 96 11490 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i v rel - relative luminous intensity 2.0 red 0.01 0.1 1 10 100 95 10061 i f - forward current (ma) i v rel - relative luminous intensity 100 10 1 0.1 red
tllr540., tlly540., tllg540. www.vishay.com rev. 1.7, 29-apr-13 4 document number: 83030 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative intensity vs. wavelength fig. 8 - forward current vs. forward voltage fig. 9 - relative luminous in tensity vs. ambient temperature fig. 10 - relative luminous intensity vs. forward current/duty cycle fig. 11 - relative luminous intensity vs. forward current fig. 12 - relative intensity vs. wavelength 590 610 630 650 670 0 0.2 0.4 0.6 0.8 1.2 690 95 10040 - wavelength (nm) 1.0 red i v rel - relative luminous intensity 01 0.1 1 10 100 v f - forward voltage (v) 5 95 10053 i f - forward current (ma) yellow t p /t = 0.001 t p = 10 s 23 4 0 0.4 0.8 1.2 1.6 2.0 i v rel - relative luminous intensity yellow t amb - ambient temperature (c) 95 10054 0 2040 6080100 yellow 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 96 11590 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i v rel - relative luminous intensity 2.0 yellow 0.01 0.1 1 10 100 95 10062 i f - forward current (ma) i v rel - relative luminous intensity 100 10 1 0.1 550 570 590 610 630 0 0.2 0.4 0.6 0.8 1.2 650 95 10039 - wavelength (nm) 1.0 yellow i rel - relative intensity
tllr540., tlly540., tllg540. www.vishay.com rev. 1.7, 29-apr-13 5 document number: 83030 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - forward current vs. forward voltage fig. 14 - relative luminous in tensity vs. ambi ent temperature fig. 15 - relative luminous intensity vs. forward current/duty cycle fig. 16 - relative luminous intensity vs. forward current fig. 17 - relative intensity vs. wavelength 02 0.1 1 10 100 4 i f - forward current (ma) green t p /t = 0.001 t p = 10 s 13 5 0 0 0.4 0.8 1.2 1.6 95 10057 20 40 60 80 100 i v rel - relative luminous intensity t amb - ambient temperature (c) green i f = 2 ma 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 96 11591 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i v rel - relative luminous intensity 2.0 green 0.1 1 10 0.01 0.1 1 10 100 100 95 10059 i v rel - relative luminous intensity i f - forward current (ma) green 520 540 560 580 600 0 0.2 0.4 0.6 0.8 1.2 620 95 10038 - wavelength (nm) 1.0 green i rel - relative intensity
tllr540., tlly540., tllg540. www.vishay.com rev. 1.7, 29-apr-13 6 document number: 83030 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters reel fig. 18 - reel dimensions as12 = cathode leaves tape first tape fig. 19 - led in tape (4.7) 12.5 0.3 a c 35.5 0.55 < 0.7 1.1 0.25 0.5 + 0.15 - 0.05 ? 5 0.15 2.54 nom. 0.5 + 0.15 - 0.05 ? 5.8 0.15 8.7 0.3 7.7 0.15 1 min. area not plane technical drawings according to din specifications r 2.49 (sphere) 6.544-5258.02-4 issue: 7; 23.07.10 95 10916 identification label: 355 90 30 48 45 52 max. 948641 vishay/type/group/tape code/production code/quantity paper adhesive tape identification label reel tape diodes: anode before cathode phototransistors: emitter before collector code 21 diodes: cathode before anode phototransistors: collector before emitter code 12 94 8671
tllr540., tlly540., tllg540. www.vishay.com rev. 1.7, 29-apr-13 7 document number: 83030 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape dimensions in millimeters option dim. h 0.5 mm as 17.3 94 8172 quantity per: 1000 reel (mat.-no. 1764) 0.9 max. ? 4 0.2 6.35 0.7 12.7 0.2 5.08 0.7 12.7 1 2 1 0.3 0.2 12 0.3 9 0.5 18 + 1 - 0.5 2.54 + 1.6 - 0.1 measure limit over 20 index-holes: 1
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
